一、特点Features

1.OTP横式卡模和直式卡模均能使用，并且能够快速调换使用；
2.采用电脑式自动检测，气压低下、马达异常、打端检测、端子有无等异常时自动停机，并显示出故障原因，方便快捷排除故障；
3.采用电脑数控调试、上银导轨丝杆。伺服与步进电机相结合精确、高效、稳定

1.OTP horizontal mode and vertical mode can be used, and can be exchanged quickly
2.Adopt the computer type automatic detection, when the air pressure is low, the motor is abnormal, the terminal is exists or not, the machine will stop automatically, and show the fault reason, convenient and quick troubleshooting
3.Adopt CNC debugging and Hiwin guide and screws.The combination of servo and stepper motor is precise, efficient and stable



参数资料Parameter

功能 Function	两根线的一端并打（合压）在同一颗端子上；同时单线的另外二端完成单端压着；两根电线上下叠压在一颗端子上，也可以并排压在一颗端子上 The ends of the two wire are crimped(combined crimping) together on the same terminal,while the other two ends of the two wires complete the single end crimp. The two wires are superimposed on a terminal, or can be crimped side by side on a terminal
电源Power supply	AC220V/110V  50/60HZ(单相/Single phase)
功率Power	3000W
加工线径Wire process range	AWG24-AWG12
切断长度Cutting length	45mm-9999mm
剥皮长度Stripping length	0.1-15mm
沾锡长度Tinning length	1.0mm-5mm
切断精度Cutting accuracy	0.2mm士0.002*L（切断长度/cutting length）
压着能力Crimping ability	标准2吨（可订3吨） Standard 2T (3 T can be customized)
生产率Speed	2200条
气压Air pressure	0.5-0.7Mpa(需使用清洁干燥气体)(use clean and dry air)
外型尺寸Dimension	L2100*W1200*H1580mm
重量Weight	约60kg